Figure 5: Raw (a) and filtered (b) data from the vertical channel at receiver
depth 230m for the 4km airgun circle shot during ODP Leg 102. High frequency
noise seen in the raw data (a) is most likely due to pipe banging in the borehole,
the drill ship maneuvering during recording intervals, and/or debris falling
down the borehole. Bandpass filtered data (b) have been processed using a Butterworth
filter at 2 and 20Hz. [Dougherty et al., 1995]
Retun to the 2003 Fall AGU Poster
THIRD PARTY BOREHOLE SEISMIC EXPERIMENTS DURING THE OCEAN DRILLING PROGRAM
Created on December 10, 2003 by Tom Bolmer